Cement Energy and Environment

company ordered a further grinding plant for flyash cement (PPC) from Gebr. Pfeiffer SE and its subsidiary Gebr. Pfeiffer(l ndia) Private Limited in February 2007. when used for drying wet extenders added to cement clinker. client. The second mill was commissioned in March 2011. Yerraguntla plant (ltalcementi Zuari) An MPS 4750 BC mill is used for the production of 180 tph of PPC with a fineness of 3500 Blaine. Flyash can be fed into the mill either in dry or wet form. Suitable for combined grinding, drying and separation, MPS vertical roller mills offer distinct advantages over other grinding systems, especially As with the previous order for the first line at Wanakbori plant, the scope of supply comprised not only the actual mill but also the conveying equipment, the plant filter, process fans and the entire planning of the plant. Fives Pillard has supplied a 97 MW NOVAFLAM burner firing coal , diesel and waste oil. It has been supplied together with the diesel oil and waste oil guns and corresponding valve trains. The first MPS 4750 BC installed at the plant went on stream in 2009 and operates to the entire satisfaction of the Courtesy: World Cement, July 2011, Pp63-72. Original contributions are invited in the following broad areas of cement industry operations: •!• Energy Management and Saving •!• Environmental Management and Improvement •!• Productivity Enhancement •!• Material Conservation Typically, these could be: •!• Success stories on Energy Saving , Environmental Improvement, Material Conservation ; •!• Diagnostic/Case studies on specific problems/deficiencies met with in plant operation; •!• Reports on Productivity enhancement studies/campaigns; •!• Reports on Benchmarking of plant performance; •!• Results of R&D on energy efficient technologies/machinery; •!• Results on plant renewal/modernisation ; and •!• Summary Proceedings (with recommendations where ava ilable) of Seminars/ Conferences devoted to Energy Environment and Productivity matters in cement industry Authors are requested to send their contributions to Secretary General, Cement Manufacturers' Association, CMA Tower, A-2E, Sector 24, Noida- 201 301 (U.P.), India, preferably in CO/floppy diskette. It will be appreciated if material is supported by ample graphics and colour photographs. Printed by Harish Panchal and published by Harish Panchal on behalf of Cement Manufacturers' Association at 2142-47 Gurudwara Road , Karol Bagh, New Delhi -11 0005 and printed at Jay Kay Offset Printers, 17 DSIDC Category II, Rohtak Road, Nangloi Industrial Area , Delhi- 110041 . 18